The innovative wireless solution to replace 0-10V light fixture control wiring
Wireless Flex Dimming features qualified Bluetooth®️ mesh technology enabled by SILVAIR that is fully compatible with any 0-10V dimmer or environmental controllers. Wireless Flex Dimming is easy to configure and enables HPS to LED retrofit growers to add precise dimming control without installing new wiring – maximizing ROI.
A Wireless Dimming Solution for Commercial Cultivators
Enable secure control of light intensity and duration at a lower total solution cost than traditional dimming cables. When combined with your climate management system or scheduler, you can maximize ROI through advanced control strategies such as:
Precise Daily Light Integral scheduling and simulated sunrise and sunset to mimic the natural photoperiod of the plant
Management of photoacclimation by gradually increasing light over time, ultimately maximizing plant output, and automatically dimming the lights when the natural light levels are sufficient, reducing operating costs
Secure
Awarded Arm’s PSA Certified ™ Level 1, an approved cybersecurity standard for networked lighting control systems by DesignLights Consortium
Low Maintenance
IP 66 for wet locations and easy cleaning, and no batteries
Broad Compatibility
Compatible with any 0-10V climate management system or scheduler
No Wiring
No wiring is needed to unlock the full benefits of precise dimming control with fast and error-free installation
Validated Tech
Qualified Bluetooth®️️ mesh technology enabled by SILVAIR can avoid a single point of failure, and is field-proven to scale to thousands of lights
A Wireless Dimming Solution for Commercial Cultivators
Enable secure control of light intensity and duration at a lower total solution cost than traditional dimming cables. When combined with your climate management system or scheduler, you can maximize ROI through advanced control strategies such as:
Precise Daily Light Integral scheduling and simulated sunrise and sunset to mimic the natural photoperiod of the plant
Management of photoacclimation by gradually increasing light over time, ultimately maximizing plant output, and automatically dimming the lights when the natural light levels are sufficient, reducing operating costs
Wireless Flex DimmingScalable & Reconfigurable
With Wireless Flex Dimming, changes are made with an easy-to-use mobile app. It’s easy to scale from a single room to thousands of lights per installation. Lighting control zones can be quickly reconfigured at any time, without a costly lift or electrician.
Wireless Flex Dimming is also ideal for the retrofitting process from legacy high-pressure sodium (HPS) systems to LEDs. A typical HPS system is limited in its dimming capabilities, unlike LED technology. However, when retrofitting HPS with LED, adding dimming cables to the existing structure can be cost prohibitive, leaving many growers with sub-optimized LED installations that cannot be dimmed. With Wireless Flex Dimming, cultivators can unlock the full benefits of precision, wire-free dimming control.
WIRELESS FLEX DIMMING SPECS
Fluence’s Wireless Flex Dimming delivers simplicity, flexibility, and cost savings to your grow operation by replacing dimming cables to each light fixture with wireless control. Wireless Flex Dimming realizes tremendous labor costs savings from reduced installation time, eliminating potential wiring errors. Simply plug a Wireless Flex Dimming Receiver into the dimming port of each Fluence light fixture, install a Wireless Flex Dimming 0-10V Adapter, and connect the 0-10V dimming control per zone.
- Number of Channels1
- Input Signal Type 0-10V DC Analog, Linear
- Light Control 0%–100% Light Intensity, Linear
- Output Signal Type Bluetooth® Mesh, 4 dBm max @ 2.4 GHz
- Max # of Receivers Per Wireless 0-10V Adapter 300
- RF Range 50 feet/15.24 m (Line-of-Sight), Up to 8 hops through the mesh
- Environmental Rating Indoor/Outdoor, IP66
- Compliances CE, FCC, IC, Bluetooth®
- Warranty 5 Years Limited
- Security Arm PSA Certified Level 1
Easy and Quick Installation
Wireless Flex Dimming is faster to install than legacy wired dimming systems, resulting in tremendous labor cost savings
Wireless Receivers simply plug into the dimming port of the light fixture power supply which enables much faster and error-free installation than wiring.
Easy to scale up and reconfigure for future grow space expansion, up to thousands of lights per installation with the intuitive mobile app.
Fully compatible with any 0-10V dimmer or environmental controllers on the market.
Settings are saved in the cloud, ensuring facility setup is never lost. New lights can be added or zones reconfigured at any time.